POWER PROBE

Introduction

The Power Probe IV is the next generation of Power Probe Circuit Testers. Now loaded with powerful multi-meter functions, advanced diagnostic test modes, an easy to read color LCD display and a new rug-ged water and dust resistant housing, the Power Probe IV is designed to give you years of trouble free testing, even in the most demanding work environments.

The unique configuration of Power Probe testers gives them many advantages over using conventional test lights or multi-meters for circuit testing.

Introduction

The Power Probe IV is the next generation of Power Probe Circuit Testers. Now loaded with powerful multi-meter functions, advanced diagnostic test modes, an easy to read color LCD display and a new rug-ged water and dust resistant housing, the Power Probe IV is designed to give you years of trouble free testing, even in the most demanding work environments.

The unique configuration of Power Probe testers gives them many advantages over using conventional test lights or multi-meters for circuit testing.

Features

-

Supply Power or Ground for Functional Component Testing

-

Self-Resetting Thermal 8 Amp Circuit Breaker

-

Multiple DC Volt readings on the same display

-

Ohmmeter provide active feedback

-

12 – 24 Volt Range

-

Bad Ground Indicator

-

Continuity Tester

-

Component Tester

-

AC-RMS, AC Peak to Peak, Frequency and Pulse Width indicators are available for signal testing

-

Fuel Injector tester for easy circuit diagnosis

-

PCM/ECM Driver supplies safe voltage for testing computer driver circuits

-

PPECT Mode for signal detection of open circuits

(When used with the ECT2000/ECT3000)

-

Active LED Lighting for illuminating workspace

-

Power Cable Length of 23 Feet

Features

-

Supply Power or Ground for Functional Component Testing

-

Self-Resetting Thermal 8 Amp Circuit Breaker

-

Multiple DC Volt readings on the same display

-

Ohmmeter provide active feedback

-

12 – 24 Volt Range

-

Bad Ground Indicator

-

Continuity Tester

-

Component Tester

-

AC-RMS, AC Peak to Peak, Frequency and Pulse Width indicators are available for signal testing

-

Fuel Injector tester for easy circuit diagnosis

-

PCM/ECM Driver supplies safe voltage for testing computer driver circuits

-

PPECT Mode for signal detection of open circuits

(When used with the ECT2000/ECT3000)

-

Active LED Lighting for illuminating workspace

-

Power Cable Length of 23 Feet

Min Operating Voltage

8 VDC

Max Operating Voltage

30 VDC

Max Tip Voltage

450 Volts

Probe Tip Resistance to Ground

130K Ohms

Computer Safe

0.1mA floating tip

Voltage Measurement

-100 to 200 VDC / VAC

Voltage Resolution

-99.99 to 99.9 V – 0.01V(10mV)

100.0 to 199.9 V – 0.1V (100mV)

Glitch Capture

>380µS Min Pulse Width

Power Feed Test

< 30 mA

Resistance Measurement

Ohms to 10K Ohms

Frequency Measurement

1Hz to 9999Hz

Driver Test

50 Ohm Pull Up on Tip

Driver On Range: 50mV to 1V

ECT Signal Detection

2 sec.

Fuel Injector Mode

LED Flash @ Min 35V @ 100µS Pulse

Red LED Response

Within 0.5V BATT V and < 10 Ohms

Green LED Response

< 10. Ohms

Circuit Breaker

8 Amp Thermal – Auto Reset

Breaker Trip Response

8 Amps = No Trip

10 Amps = 20 min.

15 Amps = 6 sec.

25 Amps = 2 sec.

Short Circuit = 0.3 sec.

Operating Temperature

-20°C (-4°F) to 50°C (122°F)

Storage Temperature

-40°C (-40°F) to 65°C (149°F)