Introduction
The Power Probe Professional Electrical Test Kit provides the circuit testing ability of the Power Probe 3 combined with the diagnostic capabilities of the Power Probe Digital Multimeter.POWER PROBE
Introduction
The Power Probe Professional Electrical Test Kit provides the circuit testing ability of the Power Probe 3 combined with the diagnostic capabilities of the Power Probe Digital Multimeter.
Introduction
The Power Probe Professional Electrical Test Kit provides the circuit testing ability of the Power Probe 3 combined with the diagnostic capabilities of the Power Probe Digital Multimeter.|
Features |
|
|
PP3 |
|
|
- |
DC Voltmeter Indicators provide active feedback |
|
- |
LED Lights |
|
- |
Bad Ground Indicator |
|
- |
Short Circuit Indicator |
|
- |
Relay and Component Tester |
|
- |
Audible Monitoring of Electrical Signals |
|
|
|
|
DMM |
|
|
- |
CAT-IV 600V hybrid safe rating |
|
- |
Digital Volt and Ohmmeter for circuit testing |
|
- |
Measures Frequency for Sensor Testing |
|
- |
Included K-Type Temp Probe allows for temperature readings |
|
Features |
|
|
PP3 |
|
|
- |
DC Voltmeter Indicators provide active feedback |
|
- |
LED Lights |
|
- |
Bad Ground Indicator |
|
- |
Short Circuit Indicator |
|
- |
Relay and Component Tester |
|
- |
Audible Monitoring of Electrical Signals |
|
|
|
|
DMM |
|
|
- |
CAT-IV 600V hybrid safe rating |
|
- |
Digital Volt and Ohmmeter for circuit testing |
|
- |
Measures Frequency for Sensor Testing |
|
- |
Included K-Type Temp Probe allows for temperature readings |
|
PP3 |
|
|
- DC 0 – 70V + 1 digit - P-P 0 – 70V |
|
|
Frequency response of tone pass through |
|
|
- 10Hz to greater than 10 Khz |
|
|
PP display |
|
|
- 15Hz Square Wave - 35Hz Sine Wave |
|
|
Power Probe Mode – Continuity to ground |
|
|
- First level – display is enabled less than 20K - Second level – green LED is enabled less than 2K |
|
|
– & + Peak Detector Response |
|
|
- Single event capture less than 200μs pulse width - Repetitive events less than 1μs pulse width |
|
|
Peak to Peak Mode |
|
|
- 0 – 70V + 1 digit - 4Hz to over 500kHz Square Wave input - 4Hz to over 250kHz Sine Wave input Threshold for PPAC/Audible passthrough |
|
|
Circuit Breaker |
|
|
8 amp thermal response – Manual reset Typical Response
|
|
|
DMM |
|
|
Operating Altitude |
2000m |
|
Relative Humidity |
75% max operating |
|
Operating Temperature |
0°C~40°C/32°F~104°F (<80% RH) |
|
Storage Temperature |
-10°C~60°C/14°F~140°F (<70% RH) |
|
Accuracy Temperature |
-18°C~28°C/64°F~82°F (<80% RH) |
|
Temperature Coefficient |
0.1x(specified accuracy)/°C (<18°C or >28°C) |
|
Sampling Frequency |
approx. 3 times/sec. |
|
Fuse Protection |
μA/mA input: F600mA/600V 10A input: F10A/600V |
|
DC/AC Voltage |
600V |
|
DC/AC Current |
10A |
|
Resistance |
60MΩ |
|
Capacitance |
60mF |
|
Frequency |
10kHz |
|
Diodes |
2.7V |
|
Continuity |
<50Ω |
|
Temperature |
-20°C~1000°C/-4°F~1832°F |
|
LCD Display |
3 ¾ digit display (6000 counts) |
|
Product Supply |
3x1.5V AAA batteries |
|
Product Size |
160mmx74mmx49mm / 6.3"x2.9"x1.9" |
|
Product Weight |
482g / 1.06lb |
|
Safety Rating |
CAT IV 600V |
|
Safety Standards |
IEC61010-1 |
|
Pollution Degree |
2 |
|
Accuracy |
±(of reading + # of least significant digits) |
