POWER PROBE

Introduction

The Power Probe 4 Master Combo Kit combines the Power Probe 4, PPECT3000 and various accessories to provide the ultimate combination of diagnostic and circuit-testing capabilities. The Power Probe 4 provides simplified testing of Motors, Lights, Relays, and Sensors, and even Fuel Injectors. Also, like all Power Probe circuit-testers, it supplies Power and Ground for functional component testing on or off the vehicle. The PPECT3000 will help you trace short and open circuits quickly and accurately.

Introduction

The Power Probe 4 Master Combo Kit combines the Power Probe 4, PPECT3000 and various accessories to provide the ultimate combination of diagnostic and circuit-testing capabilities. The Power Probe 4 provides simplified testing of Motors, Lights, Relays, and Sensors, and even Fuel Injectors. Also, like all Power Probe circuit-testers, it supplies Power and Ground for functional component testing on or off the vehicle. The PPECT3000 will help you trace short and open circuits quickly and accurately.

Features

PP4

-

Supply Power or Ground for Functional Component Testing

-

Self-Resetting Thermal 8 Amp Circuit Breaker

-

Multiple DC Volt readings on the same display

-

Ohmmeter provide active feedback

-

12 – 24 Volt Range

-

Bad Ground Indicator

-

Continuity Tester

-

Component Tester

-

AC-RMS, AC Peak to Peak, Frequency and Pulse Width indicators are available for signal testing

-

Fuel Injector tester for easy circuit diagnosis

-

PCM/ECM Driver supplies safe voltage for testing computer driver circuits

-

PPECT Mode for signal detection of open circuits ( When used with the ECT2000/ECT3000 )

-

Active LED Lighting for illuminating workspace

-

Power Cable Length of 23 Feet

 

ECT3000

-

Locate short circuits without removing plastic panels,molding, and carpet Find short to ground circuits, switches, or breaks in wires Test and find intermittent conditions Sensitivity adjustment from 1-8 in (3-20 cm) Trace short to ground wires with visual navigation & sound indicators Works on Cars, Boats, RV’s, Light Duty, Heavy Duty Trucks, and Trailers

Features

PP4

-

Supply Power or Ground for Functional Component Testing

-

Self-Resetting Thermal 8 Amp Circuit Breaker

-

Multiple DC Volt readings on the same display

-

Ohmmeter provide active feedback

-

12 – 24 Volt Range

-

Bad Ground Indicator

-

Continuity Tester

-

Component Tester

-

AC-RMS, AC Peak to Peak, Frequency and Pulse Width indicators are available for signal testing

-

Fuel Injector tester for easy circuit diagnosis

-

PCM/ECM Driver supplies safe voltage for testing computer driver circuits

-

PPECT Mode for signal detection of open circuits ( When used with the ECT2000/ECT3000 )

-

Active LED Lighting for illuminating workspace

-

Power Cable Length of 23 Feet

 

ECT3000

-

Locate short circuits without removing plastic panels,molding, and carpet Find short to ground circuits, switches, or breaks in wires Test and find intermittent conditions Sensitivity adjustment from 1-8 in (3-20 cm) Trace short to ground wires with visual navigation & sound indicators Works on Cars, Boats, RV’s, Light Duty, Heavy Duty Trucks, and Trailers

PP4

Min Operating Voltage

8 VDC

Max Operating Voltage

30 VDC

Max Tip Voltage

450 Volts

Probe Tip Resistance to Ground

130K Ohms

Computer Safe

0.1mA floating tip

Voltage Measurement

-100 to 200 VDC / VAC

Voltage Resolution

-99.99 to 99.9 V – 0.01V(10mV)

100.0 to 199.9 V – 0.1V (100mV)

Glitch Capture

>380µS Min Pulse Width

Power Feed Test

< 30 mA

Resistance Measurement

Ohms to 10K Ohms

Frequency Measurement

1Hz to 9999Hz

Driver Test

50 Ohm Pull Up on Tip

Driver On Range: 50mV to 1V

ECT Signal Detection

2 sec.

Fuel Injector Mode

LED Flash @ Min 35V @ 100µS Pulse

Red LED Response

Within 0.5V BATT V and < 10 Ohms

Green LED Response

< 10. Ohms

Circuit Breaker

8 Amp Thermal – Auto Reset

Breaker Trip Response

8 Amps = No Trip

10 Amps = 20 min.

15 Amps = 6 sec.

25 Amps = 2 sec.

Short Circuit = 0.3 sec.

Operating Temperature

-20°C (-4°F) to 50°C (122°F)

Storage Temperature

-40°C (-40°F) to 65°C (149°F)

 

ECT3000

TRANSMITTER

Min Operating Voltage

6 VDC

Max Operating Voltage

48 VDC

Working Current

<200mA

Working Frequency

4KHz

Max Operating Temp

50°C

Max Storage Temp

70°C

Max Operating Relative humidity

80% (Non-condensation)

Max Storage Relative humidity

80% (Non-condensation)

Altitude

<2000m

RECEIVER

Power Supply

2 X 1.5V AAA

Working Current

When not signal be detected <15mA

Power Consumption When Power Off

<10uA

Max Operating Temp

50°C

Max Storage Temp

70°C

Max Operating Relative humidity

80% (Non-condensation)

Max Storage Relative humidity

80% (Non-condensation)

Altitude

<2000m